Bar Muffs...

[banner001]

Just fitted some to my zxr...no more fingertips falling off after 5 minutes for me anymore

[nugget]

You wimp. In my day we didn't wear gloves in winter.

[Stig]

You wimp. In my day we didn't wear gloves in winter.

says the man with stumps and no fingers

[Gord]

Dont bar muffs, I like muffs

[banner001]

i remember the tag line "put your hands in a warm furry muff!"

[stevierst]

Bar muffs are ace, been using them for years. Summer gloves all year round.

[nugget]

You'll be buying heated gloves next. Like somebody else I know on here. If he stands near a keyhole he catches a cold.

Yes you know who I mean.

[yzfpaul]

i like these bar muffs

[nugget]

Now that's my kind of bar

[Metalface]

i like these bar muffs

Those are backsides not muffs, how you got your missus pregnant I'll never know....

[Blue-thunder]

The bar muffs look good, good on ya for going out on your zxr 400 in the winter, but going by the weather reports , your gonna need spiked tyres , just like the yamaha R1 video on you tube, its mad

The cars get their asses kicked , see link below

http://www.youtube.com/watch?v=AX6kKXrWUMI

Cheers

[banner001]

am just doing the valve clearances on the zxr whilst the road outside out house is solid ice...so its the bus for the next week

[itsnotagenesis]

am just doing the valve clearances on the zxr whilst the road outside out house is solid ice...so its the bus for the next week

I done these on my wifes old ZXR.
I thought it was great being able to do them without removing the cams.

[banner001]

am just doing the valve clearances on the zxr whilst the road outside out house is solid ice...so its the bus for the next week

I done these on my wifes old ZXR.
I thought it was great being able to do them without removing the cams.

my only problem is trying to get to the inlet shims at the very edges of the cam...have ordered some small neodymium magnets...should be able to get to them with that one

mine are all tight, looking for a place to buy shims from now.

[itsnotagenesis]

am just doing the valve clearances on the zxr whilst the road outside out house is solid ice...so its the bus for the next week

I done these on my wifes old ZXR.
I thought it was great being able to do them without removing the cams.

my only problem is trying to get to the inlet shims at the very edges of the cam...have ordered some small neodymium magnets...should be able to get to them with that one

mine are all tight, looking for a place to buy shims from now.

Yep done it with a pen magnet and some metal picks to hold it in place while removing the magnet