is this right

davidpc692 · Post by **davidpc692** » Thu Feb 23, 2012 4:15 pm

Having just had the decals fitted to my exup i'm not sure if this one on the end of the seat piece is right, it looks to me like it should continue to taper down. Not sure as i can't find any pics to confirm it or otherwise.

fang · Post by **fang** » Thu Feb 23, 2012 5:33 pm

I would have thought the one on the tail piece ( not seat hump) should be the other way round, ie rotated 180 degrees.

I wouldn't worry too much about it not aligning with the seat hump sticker, but as you say, surely the general tapering should be going in the same direction.

fang · Post by **fang** » Thu Feb 23, 2012 5:44 pm

This is the best I could come up with on T'net

It does pose a different question though...............WHY!!!

tony1 · Post by **tony1** » Thu Feb 23, 2012 6:10 pm

They r both the wrong way round

fang · Post by **fang** » Thu Feb 23, 2012 6:25 pm

Closer pic

davidpc692 · Post by **davidpc692** » Thu Feb 23, 2012 6:43 pm

Thanks Fang, i'll get in touch with imageworks and see what they can do.

AN.OK · Post by **AN.OK** » Thu Feb 23, 2012 8:32 pm

Thought it was just the tail one thats 180 out.

Willow · Post by **Willow** » Thu Feb 23, 2012 8:38 pm

It would look fine without the single Seat unit!