Exup 1000

https://www.ebay.co.uk/itm/Yamaha-FZR-1 ... 3213635406


Been looking at this one as a replacement.


Thanks for all the suggestions everyone.

Wanting an 89 twin headlight 1000 exup nose cone

Of there are any kicking about

Thankyou

Signed it

That would be great thanks

Ill look into that idea

How is everyone storing there pride and joy over the colder months?

All ideas appreciated.

Hello moi again Is there a way i can check my water pump is working without taking it off. Im just concerned about the heat on the frame i just dont remember it being there before and dont want to hurt the bike. The radiator is getting hot so i assume the thermostat is working as its letting water t...

Thanks for all the reply appreciate it

Could some one post a link or give information regards a lower temperature fan switch please, i have checked ebay etc and there is some around the 90-95 degs mark but im not sure they will fit and as the fzr has a little recess for an o ring m14x1.5 i believe is the pitch of the thread.


Thanks

The top radiator hose runs along the r/h inside of the frame. This will generate heat into the frame. Whereabouts is your temp gauge running. Should settle around 1/3 I did see the pipe down that side when i took the tank off, i dont remember it getting that hot tho. Temp gauge was about half way b...

Bike runs ok tho stalls sometimes on tick over, i have this weird heat issue on the right side where the frame is untouchable like 50-60 degs of heat, i have had the tank off and the thermostat housing is right behind there so im not sure if thats the problem or not really. Any help or ideas welcome...

Thanks alot guys i will look into the dog bones and leave the springs alone and ask for a thicker grade of oil.

Did this year come with linear fork springs as standard or progressive ?

Im having my fork seals done and was going to change the springs at the same time ive had a look at the spring and it has a linear spring already.

I've had a pair of YZF750R 6 piston calipers on my Exup-R for years now, together with Ferodo Supersport pads, Aeroquip hoses & a more recently fitted radial m/c from a Triumph, with much smaller reservoirs so that it's easier to see the gauges. Many years ago I found out that the standard cali...

Been looking myself and ive noticed thay yamaha mt bikes run the blue spots too all tho im not sure if they are the 100mm centres but i wouldnt of thought yamaha would spend more moneybon developing another caliper when they have a perfectly good one from the R1....