Exup 1000

The oil cooler on a 92 model is behind the oil filter,it is water cooled, you should see some pipes going to it, the oil filter screws onto the cooler asm

thunder_taz wrote:Have had look and couldnt see anything on the reservoirs indicating bore size.

Unusual not to have the bore size, it will be underneath the cast housing it at the back, not on the plastic.

Have you looked on the body of the reservoir? In most cases the bore size is cast in the housing.

If you have a cable driven speedo then any speedo for a Japanese bike should work except for some 70s Hondas as they all use the same ratio.

looking on ebay there is a frame listed, item no 161082958974 and 121462378188 the last one he says he cannot find the log book so maybe worth checking if he has the reg no.

A couple of weeks a go there were a few for sale, including a new one. Just keep looking as sometimes they do come up at a sensible price.

You could try a XJR1300 caliper or a TRX caliper.

An original exhaust is a 4-1 which will give a better top end at the expense of the midrange, sandy bike exhausts are 4-2-1 which give a boost to the midrange but a slight loss at the top end, the oe exhaust has the exup to give that midrange back.

Have a look also at your front wheel bearings, I had a brake judder on a FJ1200 and that was because of a knackered wheel bearing in the front wheel.

I have stick coils on my fazer 1000, I can't compare properly to the originals as one of my coils had a corroded pin which caused a misfire at low revs, since fitting the stick coils the misfire has gone but other than that everything feels the same.

If you saw the state mine were in I managed to get them all out without breaking one, I have a 02 fazer thou.

the fuel cap and seat lock is the same, but only the 2001 thundercat ignition barrel is the same

I have only recently got my bike,a 2001 fazer 1000,it is my first bike that has a exup valve,my previous bike was a Honda vfr750 which I'm trying to sell,I had to get the fazer because of wrist problems http://i268.photobucket.com/albums/jj38/solorider_uk/IMG_0366-1.jpg I have got a standard can to ...